INNOTEX GRAYTM Interfaces

INNOTEX GRAYTM Interfaces

SHIELD VULNERABLE AREAS WITH INNOTEX GRAY™
AND REDUCE HEALTH RISKS.

INNOTEX GRAY™ Interfaces*

Wristlet & Sleeve Well

Shields vulnerable area between sleeve & glove. Uninterrupted protection. Air permeable particulate
blocking layer and lining.

Wristlet Assembly

A particulate blocking layer  is inserted between the knit layers of the wristlet.

Leg Gaiter

Shields vulnerable area between pants & boots. Elasticized gaiter made of air permeable particulate
blocking layer.

Storm Band

Shields vulnerable area between the coat & pants. Elasticized interface device made of air permeable
particulate blocking layer.

Hood - NFPA 1971, 2018 Ed.

Shields vulnerable area between helmet & coat. A 3-layer system: The middle layer blocks particulates while remaining air permeable. Smooth, cooling inner
viscose filament liner.

THL 427 / TPP 22.6

TPP 34.1 after 5 washes

Particulate Blocking Layer

The INNOTEX GRAY™ Interfaces use Stedair® PREVENT to block carcinogenic particulates 0.1 µm to 1.0 µm (microns) by greater than 99%.

NFPA 1971, 2018 edition requires a minimum of 90%.

Air Permeability

The particulate blocking membrane is  air permeable, which means air freely passes through it, letting body heat dissipate and helping reduce the risk of increased core temperature.

.

 

 

 

 

 

 

 

 

*Patent Pending

Classified by UL to NFPA 1971:2018Classified by UL to NFPA 1971:2018
Innotex®

2397 Harts Ferry Rd., Ohatchee, Alabama
USA 36271

Innotex®

275 Gouin, Richmond, Quebec
Canada J0B 2H0

Customer Service

1 888 821 3121 (U.S. and Canada only)
Tel.: 819 826-5971
Fax: 819 826-5195

Email: info@innotexprotection.com
www.innotexprotection.com

® Registered Trademark of INNOTEX INC. or their respective holders.
TM Trademark of INNOTEX INC. or their respective holders.
Printed in Canada / REV. 04-16

Copyright 2018 INNOTEX INC.
All rights reserved. Because of our ongoing commitment to product quality and development we reserve the right to change, cancel, discontinue or alter any specification, design or feature without prior notice and without incurring obligation.

Disclaimer : The portrayed situations are fictional and no attempt should be made to reproduce them.

Contact Us

Subscribe to our Newsletter